Epoxy Primer High-Build Red Oxide

Description

EPOXY PRIMER HIGH-BUILD RED OXIDE is a two component oil-based epoxy priming and finishing paint for use on metal surfaces such as aluminum, iron and steel.
Use:
Best suited for use on farm equipment, railings, window frames, fences, structural steel, pipes, field machinery and storage tanks to act as protection from exposure to chemical fumes, heat, humidity, rain and wind.
Properties:
  •  Corrosion resistant
  •  Priming and Finishing paint
  •  Very hard Hi-Build finish
  •  Very good adhesion
  •  Resistance against abrasion and impact
  •  Resistance against Seawater, Mineral oil, Aliphatic Hydrocarbons etc.
Finish:Flat to Semi Gloss
Coverage:200-225 Sq. Feet per gallon depending on Surface Conditions, Porosity, Absorption, Film Thickness etc.
Thinning and Clean-up:Thinning generally not recommended. Use Arbo Special Lacquer Thinner for cleaning equipment and spillage.
Re-Coat Time:Allow 24 hours drying before recoating. Sand slightly between coats.

Available in:               1 Gallon

Available colours:  Red Oxide

Note:
EPOXY HIGH-BUILD RED OXIDE is a Two-Pack system (Base and Converter), which must be mixed thoroughly in the ratio of 3 part Base to 1 part converter and allowed to induct for one hour before being applied. Failure to allow sufficient induction will defeat expected results. Mix only the amount needed for the job. Unused mixture cannot be stored as it will cure. Always stir base and converter before blending. Pot Life after mixing is approximately 2-3 hours.

 

Does paint expire or have a specific shelf life?

Answer: When stored properly, an unopened can of latex or oil-based paint should have a shelf life of 1 year. The best storage for paint is in a cool, dry area, away from extreme hot and cold temperatures. Paint should never be allowed to freeze and should be stored away from furnaces and other heat-generating appliances